Skip to content

References

Links to Class 4 Fault-Managed Power Systems codes, standards, and industry associations.

Underwriters Laboratories

UL 1400-1

UL 1400-1 is the safety test that Class 4 power equipment has to pass. It covers the transmitters and receivers — the boxes on each end of the cable — and checks that they can sense a fault and cut the power fast enough to stay safe to touch.

View source →

Underwriters Laboratories

UL 1400-2

UL 1400-2 is the companion safety test for the cables and connectors instead of the equipment. It covers how the cable is built and marked, including whether it's rated for wet, outdoor, or buried installs.

View source →

NFPA

NEC Article 726

NEC Article 726 is the section of the National Electrical Code that covers Class 4 power. It's the rulebook electricians and inspectors use to install it correctly — things like what the equipment has to do, how fast it has to cut power during a fault, and how the cable can be run. It was added in 2023, the first new power category added to the code in a long time.

View source →

Standards Council of Canada (CSA)

CEC / CSA C22.2

Canada has its own electrical code (the CEC), separate from the U.S. NEC. CSA Group — Canada's equivalent of UL — is working on its own rules for Class 4 power so it can be installed legally in Canada. This is still in progress, not finalized. Although the cable is.

View source →

Institute of Electrical and Electronics Engineers (IEEE)

NESC (IEEE C2)

The NESC is the rulebook for the power and communication lines strung on poles and buried outside buildings — things like utility feeders and the lines running toward a building. It's a different code from the one that governs wiring inside buildings. Section 2 defines FMPS and references ATIS TR 0600040.

View source →

Alliance for Telecommunications Industry Solutions (ATIS)

ATIS TR 0600040

A technical report written for the telecom industry. It sets out how to test whether a Class 4-style power system is safe to touch, specifically for equipment used in cell sites and telecom networks.

View source →

Fault Managed Power Alliance

FMP Alliance

An industry group dedicated to the adoption and advancement of Fault-Managed Power technology.

View source →

National Electrical Contractors Association (NECA)

Intro to Class 4 Fault-Managed Power Systems

An introductory presentation on Class 4 Fault-Managed Power Systems, hosted by NECA.

View source →

BICSI

Power the Future: Implementing Class 4 Fault-Managed Power for Next-Gen Buildings

A BICSI pre-conference course on implementing Class 4 Fault-Managed Power in next-generation buildings.

View source →

Telecommunications Industry Association (TIA)

A Closer Look at Class 4 Fault-Managed Power Systems in Smart Buildings

A TIA article taking a closer look at Class 4 Fault-Managed Power Systems in smart buildings.

View source →